Hazardous Area Explosion Proof Emergency Light Series LGXPL

Product Code: LGXPL

Class I, Division 1 Explosion Proof LED Emergency Light with High Lumen spot lights (2) which can be adjusted in horizontal and vertical planes.

LGXPL USD 2705.00 2024/01/01
  • Your Starting Price:
  • Shipping Weight: .lbs
  • Quantity in Cart: none

Product Code as Configured:

Price as Configured

Overview

Class I, Division 1 Explosion Proof Emergency Light Series LGXPL

Hazardous Area LED Emergency Light rated for corrosive, vaporous, ignitable dust, marine, and liquid environments.

Brief Description:
Class I, Division 1 Explosion Proof LED Emergency Light with High Lumen spot lights (2) which can be adjusted in horizontal and vertical planes.
Manufacturer:
Luxguild
Luxguild
Los Angeles California USA 844-394-8247
Product Code:
LGXPL

Features

High Lumen Spot Lights (2) can be adjusted in horizontal and vertical planes
Unit can power up to 2 (optional) remote spot lights
Field replaceable LED circuit boards and drivers with quick disconnects
Emergency battery back-up integral to luminaire (no additional enclosure required)
3-hour emergency operation
Wall, pendant and end mounting options
Captive hinged-access door
Wide and narrow-beam optics available
Separate push-to-test and pilot light for local and remote heads
Provided with three (3) 1" NPT hubs

 

Illumination

  • Two High Lumen spot lights (2) which each may be adjusted in horizontal and vertical planes
    Unit can power up to 2 (optional) remote spot lights
    Emergency Battery Back-up built into luminaire housing (no additional enclosure required)
  • Unit may also be order with one (1) or no (0) heads to serve as power source for remote heads (optional)
  • Choice of zero (0) to four (4) remote heads. Three (3) or four (4) remote heads would require selection of one (1) or zero (0) installed heads and the appropriate # of drivers, when ordering (see Available Combinations chart in additional section). Remote heads optional
  • Choice of Medium Beam Optics (STANDARD) or  Wide Beam Optics (OPTIONAL)
  • Separate push-to-test and pilot light for local and optional remote heads

 

Mounting

Captive, hinged-access door
Separate push-to-test and pilot light for local and remote heads
Selectable (quantity) and Adjustable (horizontal and vertical planes) Lamp Heads

Housing

  • Body: A360 Aluminum (less than .4% Copper content) w/baked-on gray epoxy finish
  • Gasket: One-piece neoprene
  • Hardware: Stainless steel
  • Captive hinged-access door
  • Provided with three (3) 1" NPT hubs

Options

  • Available with zero (0) to two (2) lamp heads, with two (2) heads being standard
    Available with up to four (4) remote heads (see Combinations Available in "Optics" section)
    Medium Beam Optics (Standard) or Wide Beam Optics (Optional) available

Warranty

5-year limited warranty

Listings

CLASSIFICATIONS AND LISTINGS:

  • Class I, Division 1, Groups C & D
  • Class II, Division 1, Groups E, F & G
  • Class III
  • Class I, Zone I, Groups IIA, IIB
  • UL844 Hazardous Locations
  • UL1598A Marine Outside Type (Salt Water)
  • UL1598 Wet Locations
  • UL8750 LED Safety
  • UL924 Emergency Lighting
  • OSCG Regulation 46 CFR Subparts 111.75-15 (e) & 112.43
  • CUL
  • IP65
  • NEMA 4X
  • Temperature Classification: T6
  • NFPA 70- and NFPA 101-compliant

Installation

  • Wall, pendant and end mounting options
  • Provided with three (3) 1*" NPT hubs
  • LGXPL Series emergency lights with remote head option are provided with extra LED driver. Remote heads can only be wired to the emergency fixtures with remote head option. LED heads are furnished with 1/2"-14 NPT male hub, and must be installed on suitably listed explosion proof junction box (not provided by Luxguild). 

Electrical

  • Voltage: 120-277V
    Frequency: 50/60HZ
    Maximum Input Power with 2 LED heads: 4W
    Maximum Input Power with 4 LED heads: 8W
    Maximum Output Data for Each Remote Head:
         22V DC max.
         0.225 A (225mA)
         5W max. power

Mechanical

Independent push to test buttons for onboard lamps and optional remote lamps.
Field adjustable lamp heads can be positioned vertically and horizontally.

Applications

Intended for use in the most demanding and harsh environments.

  • Can be used where any of the following Classifications are required:
    Class I, Division 1, Groups C & D
  • Class II, Division 1, Groups E, F & G
  • Class III
  • Class I, Zone I, Groups IIA, IIB
  • UL844 Hazardous Locations
  • UL1598A Marine Outside Type (Salt Water)
  • UL1598 Wet Locations
  • UL8750 LED Safety
  • UL924 Emergency Lighting
  • OSCG Regulation 46 CFR Subparts 111.75-15 (e) & 112.43
  • CUL
  • IP65
  • NEMA 4X
  • Temperature Classification: T6

Optics

Available with zero (0) to two (2) lamp heads, with two (2) heads being standard
Available with up to four (4) remote heads (see Combinations Available chart below)
Medium Beam Optics (Standard) or Wide Beam Optics (Optional) available






Construction

Body is constructed of A360 aluminum (less than .4% copper content) with a baked-on gray epoxy finish, a one-piece neoprene gasket and stainless steel hardware.

Intended Use

Intended for use in the most demanding and harsh environments.

  • Can be used where any of the following Classifications are required:
    Class I, Division 1, Groups C & D
  • Class II, Division 1, Groups E, F & G
  • Class III
  • Class I, Zone I, Groups IIA, IIB
  • UL844 Hazardous Locations
  • UL1598A Marine Outside Type (Salt Water)
  • UL1598 Wet Locations
  • UL8750 LED Safety
  • UL924 Emergency Lighting
  • OSCG Regulation 46 CFR Subparts 111.75-15 (e) & 112.43
  • CUL
  • IP65
  • NEMA 4X
  • Temperature Classification: T6

Specifications

Input Voltage (AC)

120,277,120/277,

Remote Capable:

Yes

Number of (Remote) Heads Supported:

4

Emergency Runtime: (min.)

180,

Options

Buy American,Canadian UL Listed,

New York City Approved?:

NA

City of Chicago Approved?:

NA

Installed Weight: (.lbs)

35

Master Case Quantity:

0

Master Case Width (.in):

0

Master Case Depth (.in):

0

Master Case Height (.in):

0

Body Materials:

Aluminum,

Unit Width (.in):

19.75

Unit Depth (.in):

5.7

Unit Height (.in):

16

Country of Origin:

USA,

Battery Type:

Battery Model:

Battery mAh:

0

Battery Cell Count:

0

Circuit Input (Hz):

50/60,

Available Housing Colors:

Gray,

Illumination Lamp Type:

LED,

Max. Operation Temperature (C):

50

Max. Operation Temperature (F):

122

Min. Operation Temperature (C):

10

Min. Operation Temperature (F):

50

Certifications/Compliance:

NFPA-70,NFPA-101,UL 924,UL 1994,cULus,UL844,

Related Articles

Files

...

Printable Catalog Sheets

Get The Specification Sheet.

...

Installation Sheets

Get The Installation Sheet

...

Photometric Data

Get The IES Files

Dimensions

Price List