Brief Description: The AS series extractors are designed for the suction of offcuts and production waste deriving from production cycles and packaging machinery. The vacuumed scraps are contained and compacted in a nylon bag, which filters out any dust and allows waste to be removed quickly and easily. Built-in silencer and window for monitoring the fullness of the bag.
|
Description: The AS 10 Industrial Three Phase Vacuum Cleaner is a powerhouse designed for efficient suction of wood, optics, plastics, and packaging line scraps with its low noise operation and compact, mobile build. Boasting a power of 0.85 kW and voltage of 400V, it offers a maximum water lift of 1900 mmH₂O and airflow of 150 m³/h through its 80 mm suction inlet. With a collection capacity of 130 liters and dimensions of 59x55x132 cm (LxWxH), this vacuum cleaner ensures easy filter replacement and customization options like total stainless steel construction, grounding, and different voltages and frequencies upon request. Its silent operation, maintenance-free design, and efficient filtration with a nylon bag make it an indispensable tool for continuous duty operations, providing a seamless solution for industrial debris management. |
Features:
- Low noise level
- Compact and mobile
- Easy filter replacement
- Conceived for packaging lines scraps and wastes suction
- Tank provided with large capacity nylon filtering bag
- Full customization for specific needs
|
Compiiance:
- Compliance with electrical protection standards: IP 55
- Filter efficiency compliant with IEC 60335-2-69 standards: Nylon - L
|
Suction Unit Overview The suction unit is a side channel blower, with direct coupling between the motor and the
impeller fan. It designed without any transmission system, and is therefore silent, totally
maintenance free and suitable for continuous duty operations. |
Filter Unit Overview Thanks to the nylon filtering bag, a great quantity of light and voluminous material can be
collected and easily disposed. A transparent rear window on the upper cover allows to
keep the filling level of the filtering bag under control. |
Collection Unit Overview he material is vacuumed from the top by a suction inlet placed on the upper cover and
then is vertically collected in the collection bag. This way, the material is not collected at the
entrance and clog inside the suction system is avoided. |
Collection Unit Capacity in gallons 34 |
Collection Unit Capacity in liters 130 |
ATEX Overview ,,,,,,,,,,,,,,, |
IECEx Overview ,,,,,,,,,,,,,,, |
|
|
|
|
|
Input Voltage (AC) 400, vac
|
|
Electrical Input Hertz: 50, hz |
Electrical Motor Phase: 3, |
Mobility/Portability: Wheels, |
Vacuum Power Method: Corded Electrical Motor, |
Intended Use: Mixed Used,Dust,Solids, |
|
|
|
Noise level (EN ISO 3744) 68 dB(A) |
|
Filter Surface Area 0 sq/ft |
HEPA Filter Class (If applicable) |
Oil Capacity (If applicable) gallons |
|
|
Filter Surface Area 0 sq/ft |
Intended Use Mixed Used,Dust,Solids, |
Air compressor required? NA |
Air compressor minimal recommended, if required (hp) |
|
Material Efficiency (IEC 60335-2-69) Nylon - L |
|
|
Electrical Ingress Protection (IP Ratings) |
Hazardous Area EPL Class NA, |
Hazardous Area EPL Division NA, |
Hazardous Area EPL Group NA, |
Hazardous Area EPL Temperature Code NA, |
Hazardous Area EPL Zone NA, |
Hazardous Area EPL Zone Group NA, |
Hazardous Area EPL Zone Protection NA, |
Hazardous Area EPL Equipment Protection Levels |
|
|
|
|
Options:
- Total stainless steel construction
- Earth grounding
- Stainless steel sieve grid
- Other voltages and frequencies available upon request
- Filter for fine dust - Class M
|
Compliance
- Compliance with electrical protection standards: IP 55
- Filter efficiency compliant with IEC 60335-2-69 standards: Nylon - L
|
|