Brief Description: DG VL SE series industrial vacuum cleaners have a blower with two impellers connected in series, capable of producing extremely high vacuum levels that are powerful enough to suck up materials with a high specific gravity.
|
Description: Introducing the DG VL 150 SE Industrial Vacuum Cleaner, engineered for efficiency in demanding industrial settings. With a powerful 17.3 kW side channel blower motor, it delivers a maximum water lift of 6000 mmH₂O and an airflow of 720 m³/h. Featuring a 160-liter wheeled steel collection tank and a large surface filter with 70,000 cm² diameter, it ensures prolonged operation with reduced downtime. Its noise level of 78 dB(A) and electrical protection rated at IP65 ensure safety and comfort in the workplace. Optional features such as HEPA and PTFE coated filters provide enhanced filtration capabilities, while customizable voltages and frequencies cater to specific operational requirements. Built for reliability and performance, this vacuum cleaner is indispensable for industries dealing with cement, ceramics, and construction materials. |
Features:
- Side channel blower motor, powerful and silent, totally maintenance-free, suitable for continuous duty
- Largest surface filter in its category
- Integrated filter cleaning system
- Tangential suction inlet with integrated separation cyclone
- Pressure relief valve for motor protection
- Reduced downtime of machine tools
- Suitable for high specific weight material
- Forklift intakes included
- Easily removable container for safe disposal of collected material
|
Compiiance:
- Compliant with IEC 60335-2-69 standards for polyester filters (ANT M)
- Option for ATEX certification available for hazardous environments
|
Suction Unit Overview The suction unit is a side channel blower, with direct coupling between the motor and the
impeller fan. It designed without any transmission system, and is therefore silent, totally
maintenance free and suitable for continuous duty operations.
A pressure relief valve protects the motor, providing additional air for cooling. |
Filter Unit Overview A vacuum gauge enables to check constantly the state of the filter and detect possible
clogging, warning the operator that the filter must be cleaned.
The suction inlet is tangential, with an internally welded cyclone that deflects the incoming
material.
The filter is equipped with a semiautomatic cleaning system handled by the operator. A
pneumatic cylinder shakes the star filter by a vertical shaking movement which causes the
detachment of dusts and wastes from the filter. This way, the operator will be able to
decide without any limits when to turn the vacuum cleaner off and to clean the filter.The
vacuum cleaner is equipped with a compressor which guarantees the autonomy of the
machine. |
Collection Unit Overview The vacuumed material is collected into a wheeled steel container, which can be extracted
for easy disposal and can be used with optional disposable bags, for safer and handier
disposal
Forklift intakes for easy discharge. |
Collection Unit Capacity in gallons 43 |
Collection Unit Capacity in liters 160 |
|
|
|
|
|
|
|
Input Voltage (AC) 400, vac
|
|
Electrical Input Hertz: 50, hz |
Electrical Motor Phase: 3, |
Mobility/Portability: Wheels, |
Vacuum Power Method: Corded Electrical Motor, |
Intended Use: Dust,Solids,Powders, |
|
|
|
Noise level (EN ISO 3744) 78 dB(A) |
|
Filter Surface Area 0 sq/ft |
HEPA Filter Class (If applicable) H14, |
Oil Capacity (If applicable) gallons |
|
|
Filter Surface Area 0 sq/ft |
Intended Use Dust,Solids,Powders, |
Air compressor required? NA |
Air compressor minimal recommended, if required (hp) |
|
Material Efficiency (IEC 60335-2-69) Polyester - ANT M |
Cleaning System SELF CLEAN |
|
Electrical Ingress Protection (IP Ratings) |
Hazardous Area EPL Class NA, |
Hazardous Area EPL Division NA, |
Hazardous Area EPL Group NA, |
Hazardous Area EPL Temperature Code NA, |
Hazardous Area EPL Zone NA, |
Hazardous Area EPL Zone Group NA, |
Hazardous Area EPL Zone Protection NA, |
Hazardous Area EPL Equipment Protection Levels |
|
|
|
|
Options:
- Absolute HEPA filter (H14)
- PTFE-coated filter, Class M
- Stainless steel collection tank
- Stainless steel tank and filter chamber
- Remote control functionality
- Availability of other voltages and frequencies upon request
- ATEX certification option
- Floor-fixed system, without wheels
- Earth grounding feature
|
Compliance
- Compliant with IEC 60335-2-69 standards for polyester filters (ANT M)
- Option for ATEX certification available for hazardous environments
|
|